1, the machine adopts the new type of integrated circuit, the access type PC board to control the whole package Subwoofer design;
2, the whole machine combination perfect maturity, low noise, reduce the pressure of work;
Article 3, strapping speed, each bundle package just 2.0 seconds;Instantaneous heating, 5 seconds can make the heating work piece, into the best packaging state, province electricity utility;
4, strapping action within 60 seconds after the completion of the outage in standby mode, a new generation of electric design of the steel;
Semi-automatic strapping machine 5, improving design, elaborate manufacture, using range is wide, regardless of the size of the package, don't have to adjust the machine can be packaged;
6, this machine is a mechanical structure, part adopts imported parts, after the blade is stable and reliable, convenient adjustment, etc;
7, the packer mesa is higher, handy to operate, suitable for packing lighter items.
8, no deformation characteristics of short circuit, and the packaging is applicable range is extensive;
9 any packing tape, market, and from 6 mm to 15 mm, bonding effect is best.
Packaged objects in the baling press center, the first right acrosome, the front end of the compression zone, tied belt tightening on the object, then left the top body rise, the lower clamping band position, heating into two belt, the middle of the top knife, cut the ribbon, the next strapping tape in place, to complete a working cycle.Baling press is the use of packing tape winding product or package, then tighten and ends by heating molten or use the material such as bag buckles connection machine.Packer's function is to make plastic belt can be tied close to the package surface, guarantee the package in the transport, storage is not scattered by strapping not firm, at the same time should also be strapping and tidy and beautiful.